Water-based coating, printing ink dispersant LD-403-1

1, composition:
LD- 403 gather carboxylic acid sodium salt solution LD- 403-1 to gather the carboxylic acid ammonia salt solution
2, typical physical data:
The outward appearance density 25℃, g/ does not volatilize share %PH value LD-403 faint yellow liquid 1.26407.0-8.5 the LD-403-1 faint yellow liquid 1.13407.5-8.5
3, application scope:
Construction coating papermaking coating water sex-linked colors thick liquid LD-403 is suitable for is suitable is suitable for LD-403-1 for is suitable for
4, recommendation amount used:
Mineral pigment quantity % organic pigment quantity % LD-4030.2-10.5-3 LD-403-10.2-21-20
5, usage:
Joins the dispersing agent in the water to disperse first evenly, then joins the face, the padding.
6, characteristic and merit:
This classification medicinal powder to the inorganic face, the padding and the organic pigment has extremely good moist, scattered, the stable effect. LD- 403, LD-403-1 is the inorganic face, the padding main dispersing agent, to the inorganic face, the padding has the extremely high moistness, scattered efficiency, but does not add the auxiliary dispersing agent and the wetting agent, has the amount used to be few, the vesicular nature is low, the viscosity stability is good, unfolds the color to be good, does not affect the gloss the characteristic. May use in the plain glass, half light, in the high light coating. LD-403-1 belongs to the high polymer to gather the carboxylic acid amine salt, to organic, the mineral pigment has the extremely good dispersion moist effect, does not affect the gloss, the water resistance is good, is suitable for the high light, the high solid share coating, is suitable especially for the outer wall coating.
7, packing:
50kg does not recycle the green to model the feeding trough. Rong Ju has not used completely unprecedentedly, after the use, must fasten down the bung.
8, storing:
Is far away from the heat source, the fire hazard, to evade the light preservation.
9, matters needing attention:
LD-403 meets the thick alkali becomes the gelatinous state, when the use must avoid with the thick alkali contact.